Auction results archive

Mr Bullbar Aluminium Bullbar suit T904, T908 and T909 with backing plate. Located Orange, NSW

4 White Plastic Guards. Located Orange, NSW

1 x 8 stud alloy trailer rim. Located Orange, NSW

4 X 235/55R17 TYRES AND RIMS. Located Nyngan, NSW

CATERPILLAR DOZER. Parts only. Complete engine supplied in shuttle. Located Nyngan, NSW

AIR CON #1. Taller stand. Located Nyngan, NSW

AIR CON #2. Shorter stand. Located Nyngan, NSW

11,000L SLIP ON WATER CART. Vendor advises tank is in working order. (can go with Volvo FL10 also in sale). Located Maryvale, NSW (Geurie)

CIRCA 1999 Caterpillar 330BL PIN: 8TR00412 Hrs: 13013. Operating machine that developed hydraulic issue and was parked. Some parts have been replaced but still has slow hydraulic operation.1.6m rock bucket, travel width 3.21m. CIRCA 1999 Caterpillar 330BL PIN: 8TR00535 (SPARE) Hrs: 12597. Spare parts machine has good engine with minor parts removed, no track gear supplied. Vendor states parts in this machine are suitable to repair first machine. Crane will be required to load spare machine and boom, Located Nyngan, NSW.

Circa 1990's boomerang Tri dolly, on spring suspension BPW axles 315/80R22.5 Tyres spider rims, Belted mud gaurds, greasy turntable Draw bar lenght 2.7m Pin to pin 3.83, Pin to rear 2m 90mm pin, Note: Width 3.04m Suit off road application NOTE: Identifier found however illegible stamping. Located Nyngan, NSW.

RAVEN VIPER PRO DISPLAY. Serial no. 3781. Supplied with operation manual, mount and wiring. Was removed from a Rogator 1084 SP sprayer. Used as a rate and section controller. Excellent conditon. Located Inverell, NSW

ANHYDROUS GAS PARTS AND HOSES. Located Delungra, NSW

JOHN SHEARER ECONODRAFT U-BOLTS. Located Delungra, NSW

RURAL PLUMBING PARTS, FITTINGS, FLOATS, PULLEYS. Located Delungra, NSW

2 x CHEMICAL TRANSFER PUMPS. Suitable for parts or restoration. Electric motors in working condition, pump housings broken. Located Delungra, NSW

BAR EXCELL 3200 pressure cleaner. Not currently working, has lost pressure. Potentially an easy fix. Recent new lance. Located Delungra NSW.

Hendrickson Air suspension 2.4 centers 10stud hubs removed from goldacres spray to upgraded to 3m. Located Uranquinty, NSW.

2016 WESTERN STAR 5864SS. VIN. 5KKJBBDV6FPGC1806. Engine no. 471915SO232282. Tyres at 95% all around. Auto greaser. Hydraulics. Airliner suspension. LED driving and spot lights. Rear hookup. Jost ballrace turntable. Battery isolator. 40 inch stratosphere sleeper. Truck presenting in excellent condition. No GST on this lot. GST will still be added to the buyers premium. Located Ocean Shores, NSW

Unused Grader Attachment to Suit Skid Steer, Blade Width 2.42m Rotation angle 25°, Incline Angle: 24°, Shipping Dimensions: 2590mm L x 2160mm W x 1365mm H, Weight: 640Kgs, EXEQ: 169641

Unused Rock Picking Bucket to Suit Skid Steer, Screening Width 1.93m, Shipping Dimensions: 2075mm L x 1590mm W x 1090mm H, Weight: 681Kgs, EXEQ: 170533

Unused Brush Cutter Attachment, To Suit Skid Steer, Cutting Width: 1828mm, Required Operating Flow: 75-115L/min, Operating Pressure: 16MPa, Approximate Shipping Dimensions 2333mm L x 1942mm W x 560mm H, Approximate Weight: 396kg, **NOTE: UNIT REQUIRES OIL TO BE ADDED TO THE GEARBOX BEFORE USE. EXEQ: 165958

Unused Concrete Mixer Bucket Attachment, To Suit Skid Steer, Bucket Capacity: 0.35 Cubic Metres, Required Operating Flow: 75 - 140L/m, Operating Pressure: 16-21 MPA, Approximate Shipping Dimensions: 1700mm L x 920mm W x 800mm H, Approximate Weight: 525kg. EXEQ: 162329

Unused Auger Drive Attachment, To Suit Skid Steer, Comes with 1 x 12 Inch Auger, Required Operating Flow: 50-75 L/min, Operating Pressure: 16MPa, Approximate Shipping Dimensions: 1210mm L x 1110mm W x 810mm H, Approximate Weight: 240kg EXEQ: 162368

Unused 4 in 1 Bucket, To Suit Skid Steer, 1840mm Wide, Approximate Shipping Dimensions: 1960mm L x 1055mm W x 790mm H, Approximate Weight: 240kg. EXEQ: 163422

Unused Trencher Attachment for Skid Steer Loader, digging Width: 200mm, Digging Depth : 900mm, Required flow: 50-75 L/Min, Approximate Shipping Dimensions: 1900mm L x 1240mm W x 790mm H, Approximate Weight: 360kg. EXEQ: 162420

Unused Rock Bucket, To Suit Skid Steer, 1830mm wide, Approximate Shipping Dimensions 1950mm L x 1060mm W x 600mm H, Approximate Weight: 190kg. EXEQ: 172641

Unused Stick Rake Attachment, To Suit Skid Steer, Approximate Shipping Dimensions: 600mm high x 2190mm Wide. EXEQ: 167814

Unused Tree / Fence Post Puller, To Suit Skid Steer. EXEQ: 162068

Unused Forks Attachment, to suit Skid Steer, 1200mm Long Forks, Approximate Shipping Dimensions: 1240mm L x 1430mm W x 880mm H, Approximate Weight: 105kg. EXEQ: 167864

Unused Fork Extensions / Slippers, Overall length 1705mm, 145mm Wide, Locking pins, Approximate Shipping Dimensions: 1700mm L x 160mm W x 50mm H, Approximate Weight: 23kg. EXEQ: S07898

Unused Hydraulic Skid Steer / Excavator Post Driver, Model: EXEQ750P, To Suit both Skid Steers and/or 6-8 Ton Excavators, Side mount for Skid Steers / Top Mount for Excavators, Can be used as both Post Driver & Rock Breaker, Operating Pressure: 120-170 bar, Hydraulic Flow: 50-90 Litres per minute, Frequency - 400-800 bpm, Comes with 1 x Post Driver & 2 x Chisels, Each unit comes with a separate heavy duty mounting plate for skid steers, To be attached by buyer, Approximate plate dimensions 1180mm x 480mm, Weight: 375kg, NOTE: Gas canisters do not come filled. EXEQ: 161954

Unused Hydraulic Skid Steer / Excavator Post Driver, Model: EXEQ530P, To Suit both Skid Steers and/or 2.5-4 Ton Excavators, Side mount for Skid Steers / Top Mount for Excavators, Can be used as both Post Driver & Rock Breaker, Operating Pressure: 90-120 bar, Hydraulic Flow: 25-50 Litres per minute, Frequency - 600-1000 bpm, Comes with 1 x Post Driver & 2 x Chisels, Each unit comes with a separate heavy duty mounting plate for skid steers, To be attached by buyer, Approximate plate dimensions 1180mm x 480mm, Weight: 180kg, NOTE: Gas canisters do not come filled. EXEQ: 161945

Unused Large Levelling Bar, to suit skid steer / Loader, Approximately 2500mm wide x 2000mm long, with grabs, made from 50 x 50 heavy wall box, Approximate Shipping Dimensions: 2000mm L x 2500mm W x 20mm H, Approximate Weight: 100kg. EXEQ: S08226

Unused Medium Levelling Bar, to suit Skid Steer / Loader, Approximately 2000mm wide x 1500mm long, with grabs, made from 50 x 50 heavy wall box, Approximate Shipping Dimensions: 2000mm L x 1500mm W x 20mm H, Approximate Weight: 60kg. EXEQ: S08050

Unused Mulcher Attachment to suit 18T-24T Excavator, Model: MLCH-20T, Cutting Width: 1600mm, Required Oil Flow: 100-160 l/m, Pick Up Dimensions:, Pin Diameter: 80mm, Centre to Centre: 460mm, Between the ears: 340mm, Shipping Dimensions: 2300mm L x 900mm W 730mm H, Weight: 720Kgs. EXEQ: 167126

Unused Mulcher Attachment to suit 2T-5T Excavator , Model: MLCH-05T, Cutting Width:, 600mm,, Required Oil Flow:30-50 l/min, Pick Up Dimensions:, Pin: 45mm, Centre to Centre: 255mm, Between the ears : 170mm, Shipping Dimensions: 1010mm L x 670mm W x 810mm H, Weight: 240Kgs EXEQ: 167107

Unused Mud Bucket to Suit 28-36T Excavator, Width: 2030mm, Cutting edge width: 2080mm, Pin Diameter: 90mm, Centre to Centre: 513mm, Between the ears: 400mm, EXEQ; 175165

Unused 1500mm GP/Digging Bucket to Suit 28-36T Excavator, Width: 1500mm, Cutting edge width: 1600mm, Pin Diameter: 90mm, Centre to Centre: 513mm, Between the ears: 400mm, EXEQ: 175160

Unused 1300mm GP/Digging Bucket to Suit 28-36T Excavator, Width: 1300mm, Cutting edge width: 1400mm, Pin Diameter: 90mm, Centre to Centre: 513mm, Between the ears: 400mm, Shipping Dimensions: L: 1650mm, W: 1400mm, H: 1400mm, Weight: 1250kg EXEQ: 175155

Unused 650mm GP/Digging Bucket to Suit 28-36T Excavator, Width: 650mm, Cutting edge width: 750mm, Pin Diameter: 90mm, Centre to Centre: 513mm, Between the ears: 400mm, EXEQ: 175150

Unused Hydraulic Tilting Mud Bucket to Suit 18-25T Excavator, Width: 1850mm, Pin Diameter: 80mm, Centre to Centre: 460mm, Between the ears: 340mm, EXEQ: 161682

Unused Sieve / Riddle Bucket to Suit 18-25T Excavator, Width: 1840mm Pin Diameter: 80mm, Centre to Centre: 460mm, Between the ears: 340mm,Shipping Dimensions: L: 1850mm, W: 1200mm, H: 1050mm, Weight: 1360kg. EXEQ: 161673

Unused Grab Attachment to Suit 18-25T Excavator, Width: 1010mm, Pin Diameter: 80mm, Centre to Centre: 460mm, Between the ears: 340mm, Maximum Grab Opening: 1880mm,Shipping Dimensions: L: 1200mm, W: 900mm, H: 1520mm, Weight: 1180kg EXEQ. 161663

Unused Compaction Wheel to Suit 18-25T Excavator, Width: 480mm, Pin Diameter: 80mm, Centre to Centre: 460mm, Between the ears: 340mm, Shipping Dimensions: L: 890mm, W: 600mm, H: 1200mm, Weight: 900kg. EXEQ: 161651

Unused 1200mm GP/Digging Bucket to Suit 18-25T Excavator, Width: 1200mm, Cutting edge width: 1270mm, Pin Diameter: 80mm, Centre to Centre: 460mm, Between the ears: 340mm, Shipping Dimensions: L: 1450mm, W: 1300mm, H: 1200mm, Weight: 970kg EXEQ: 161622

Unused 900mm GP/Digging Bucket to Suit 18-25T Excavator, Width: 900mm, Cutting edge width: 980mm, Pin Diameter: 80mm, Centre to Centre: 460mm, Between the ears: 340mm, Shipping Dimensions: L: 1500mm, W: 1000mm, W: 1200mm, Weight: 810kg. EXEQ: 161612

Unused 600mm GP/Digging Bucket to Suit 18-25T Excavator, Width: 600mm, Cutting edge width: 680mm, Pin Diameter: 80mm, Centre to Centre: 460mm, Between the ears: 340mm, Shipping Dimensions: L: 1500mm, W: 700mm, W: 1200mm, Weight: 577kg. EXEQ: 161603

Unused Hydraulic Tilting Mud Bucket to Suit 10-17T Excavator, Width: 1550mm, Pin Diameter: 65mm Centre to Centre: 385mm, Between the ears: 260mm, EXEQ: 161591