Lot 1
Unused Grader Attachment to Suit Skid Steer, Blade Width 2.42m Rotation angle 25°, Incline Angle: 24°, Shipping Dimensions: 2590mm L x 2160mm W x 1365mm H, Weight: 640Kgs, EXEQ: 169641
REFERRED$1500
Past sales
EXEQ Auction - Perth WA
May 6 2026 · 127 lots · 46 sold under the hammer. REFERRED lots may have sold by negotiation afterwards.
1–48 of 127 lots
EXEQ Auction - Perth WA
May 6 2026 9:00PM · 127 lots
Lot 2
Unused Rock Picking Bucket to Suit Skid Steer, Screening Width 1.93m, Shipping Dimensions: 2075mm L x 1590mm W x 1090mm H, Weight: 681Kgs, EXEQ: 170533
SOLD$1000
Lot 3
Unused Brush Cutter Attachment, To Suit Skid Steer, Cutting Width: 1828mm, Required Operating Flow: 75-115L/min, Operating Pressure: 16MPa, Approximate Shipping Dimensions 2333mm L x 1942mm W x 560mm H, Approximate Weight: 396kg, **NOTE: UNIT REQUIRES OIL TO BE ADDED TO THE GEARBOX BEFORE USE. EXEQ: 165958
SOLD$1600
Lot 4
Unused Concrete Mixer Bucket Attachment, To Suit Skid Steer, Bucket Capacity: 0.35 Cubic Metres, Required Operating Flow: 75 - 140L/m, Operating Pressure: 16-21 MPA, Approximate Shipping Dimensions: 1700mm L x 920mm W x 800mm H, Approximate Weight: 525kg. EXEQ: 162329
REFERRED$700
Lot 5
Unused Auger Drive Attachment, To Suit Skid Steer, Comes with 1 x 12 Inch Auger, Required Operating Flow: 50-75 L/min, Operating Pressure: 16MPa, Approximate Shipping Dimensions: 1210mm L x 1110mm W x 810mm H, Approximate Weight: 240kg EXEQ: 162368
SOLD$1600
Lot 6
Unused 4 in 1 Bucket, To Suit Skid Steer, 1840mm Wide, Approximate Shipping Dimensions: 1960mm L x 1055mm W x 790mm H, Approximate Weight: 240kg. EXEQ: 163422
REFERRED$1000
Lot 7
Unused Trencher Attachment for Skid Steer Loader, digging Width: 200mm, Digging Depth : 900mm, Required flow: 50-75 L/Min, Approximate Shipping Dimensions: 1900mm L x 1240mm W x 790mm H, Approximate Weight: 360kg. EXEQ: 162420
REFERRED$1300
Lot 8
Unused Rock Bucket, To Suit Skid Steer, 1830mm wide, Approximate Shipping Dimensions 1950mm L x 1060mm W x 600mm H, Approximate Weight: 190kg. EXEQ: 172641
SOLD$1500
Lot 9
Unused Stick Rake Attachment, To Suit Skid Steer, Approximate Shipping Dimensions: 600mm high x 2190mm Wide. EXEQ: 167814
SOLD$800
Lot 10
Unused Tree / Fence Post Puller, To Suit Skid Steer. EXEQ: 162068
REFERRED$400
Lot 11
Unused Forks Attachment, to suit Skid Steer, 1200mm Long Forks, Approximate Shipping Dimensions: 1240mm L x 1430mm W x 880mm H, Approximate Weight: 105kg. EXEQ: 167864
SOLD$1000
Lot 12
Unused Fork Extensions / Slippers, Overall length 1705mm, 145mm Wide, Locking pins, Approximate Shipping Dimensions: 1700mm L x 160mm W x 50mm H, Approximate Weight: 23kg. EXEQ: S07898
SOLD$200
Lot 13
Unused Hydraulic Skid Steer / Excavator Post Driver, Model: EXEQ750P, To Suit both Skid Steers and/or 6-8 Ton Excavators, Side mount for Skid Steers / Top Mount for Excavators, Can be used as both Post Driver & Rock Breaker, Operating Pressure: 120-170 bar, Hydraulic Flow: 50-90 Litres per minute, Frequency - 400-800 bpm, Comes with 1 x Post Driver & 2 x Chisels, Each unit comes with a separate heavy duty mounting plate for skid steers, To be attached by buyer, Approximate plate dimensions 1180mm x 480mm, Weight: 375kg, NOTE: Gas canisters do not come filled. EXEQ: 161954
REFERRED$400
Lot 14
Unused Hydraulic Skid Steer / Excavator Post Driver, Model: EXEQ530P, To Suit both Skid Steers and/or 2.5-4 Ton Excavators, Side mount for Skid Steers / Top Mount for Excavators, Can be used as both Post Driver & Rock Breaker, Operating Pressure: 90-120 bar, Hydraulic Flow: 25-50 Litres per minute, Frequency - 600-1000 bpm, Comes with 1 x Post Driver & 2 x Chisels, Each unit comes with a separate heavy duty mounting plate for skid steers, To be attached by buyer, Approximate plate dimensions 1180mm x 480mm, Weight: 180kg, NOTE: Gas canisters do not come filled. EXEQ: 161945
REFERRED$300
Lot 15
Unused Large Levelling Bar, to suit skid steer / Loader, Approximately 2500mm wide x 2000mm long, with grabs, made from 50 x 50 heavy wall box, Approximate Shipping Dimensions: 2000mm L x 2500mm W x 20mm H, Approximate Weight: 100kg. EXEQ: S08226
REFERRED$100
Lot 16
Unused Medium Levelling Bar, to suit Skid Steer / Loader, Approximately 2000mm wide x 1500mm long, with grabs, made from 50 x 50 heavy wall box, Approximate Shipping Dimensions: 2000mm L x 1500mm W x 20mm H, Approximate Weight: 60kg. EXEQ: S08050
SOLD$200
Lot 17
Unused Mulcher Attachment to suit 18T-24T Excavator, Model: MLCH-20T, Cutting Width: 1600mm, Required Oil Flow: 100-160 l/m, Pick Up Dimensions:, Pin Diameter: 80mm, Centre to Centre: 460mm, Between the ears: 340mm, Shipping Dimensions: 2300mm L x 900mm W 730mm H, Weight: 720Kgs. EXEQ: 167126
SOLD$6600
Lot 18
Unused Mulcher Attachment to suit 2T-5T Excavator , Model: MLCH-05T, Cutting Width:, 600mm,, Required Oil Flow:30-50 l/min, Pick Up Dimensions:, Pin: 45mm, Centre to Centre: 255mm, Between the ears : 170mm, Shipping Dimensions: 1010mm L x 670mm W x 810mm H, Weight: 240Kgs EXEQ: 167107
SOLD$4100
Lot 19
Unused Mud Bucket to Suit 28-36T Excavator, Width: 2030mm, Cutting edge width: 2080mm, Pin Diameter: 90mm, Centre to Centre: 513mm, Between the ears: 400mm, EXEQ; 175165
REFERRED$200
Lot 20
Unused 1500mm GP/Digging Bucket to Suit 28-36T Excavator, Width: 1500mm, Cutting edge width: 1600mm, Pin Diameter: 90mm, Centre to Centre: 513mm, Between the ears: 400mm, EXEQ: 175160
REFERRED$200
Lot 21
Unused 1300mm GP/Digging Bucket to Suit 28-36T Excavator, Width: 1300mm, Cutting edge width: 1400mm, Pin Diameter: 90mm, Centre to Centre: 513mm, Between the ears: 400mm, Shipping Dimensions: L: 1650mm, W: 1400mm, H: 1400mm, Weight: 1250kg EXEQ: 175155
No result recorded
Lot 22
Unused 650mm GP/Digging Bucket to Suit 28-36T Excavator, Width: 650mm, Cutting edge width: 750mm, Pin Diameter: 90mm, Centre to Centre: 513mm, Between the ears: 400mm, EXEQ: 175150
No result recorded
Lot 23
Unused Hydraulic Tilting Mud Bucket to Suit 18-25T Excavator, Width: 1850mm, Pin Diameter: 80mm, Centre to Centre: 460mm, Between the ears: 340mm, EXEQ: 161682
REFERRED$200
Lot 24
Unused Sieve / Riddle Bucket to Suit 18-25T Excavator, Width: 1840mm Pin Diameter: 80mm, Centre to Centre: 460mm, Between the ears: 340mm,Shipping Dimensions: L: 1850mm, W: 1200mm, H: 1050mm, Weight: 1360kg. EXEQ: 161673
REFERRED$400
Lot 25
Unused Grab Attachment to Suit 18-25T Excavator, Width: 1010mm, Pin Diameter: 80mm, Centre to Centre: 460mm, Between the ears: 340mm, Maximum Grab Opening: 1880mm,Shipping Dimensions: L: 1200mm, W: 900mm, H: 1520mm, Weight: 1180kg EXEQ. 161663
REFERRED$1200
Lot 26
Unused Compaction Wheel to Suit 18-25T Excavator, Width: 480mm, Pin Diameter: 80mm, Centre to Centre: 460mm, Between the ears: 340mm, Shipping Dimensions: L: 890mm, W: 600mm, H: 1200mm, Weight: 900kg. EXEQ: 161651
REFERRED$600
Lot 27
Unused 1200mm GP/Digging Bucket to Suit 18-25T Excavator, Width: 1200mm, Cutting edge width: 1270mm, Pin Diameter: 80mm, Centre to Centre: 460mm, Between the ears: 340mm, Shipping Dimensions: L: 1450mm, W: 1300mm, H: 1200mm, Weight: 970kg EXEQ: 161622
REFERRED$100
Lot 28
Unused 900mm GP/Digging Bucket to Suit 18-25T Excavator, Width: 900mm, Cutting edge width: 980mm, Pin Diameter: 80mm, Centre to Centre: 460mm, Between the ears: 340mm, Shipping Dimensions: L: 1500mm, W: 1000mm, W: 1200mm, Weight: 810kg. EXEQ: 161612
REFERRED$100
Lot 29
Unused 600mm GP/Digging Bucket to Suit 18-25T Excavator, Width: 600mm, Cutting edge width: 680mm, Pin Diameter: 80mm, Centre to Centre: 460mm, Between the ears: 340mm, Shipping Dimensions: L: 1500mm, W: 700mm, W: 1200mm, Weight: 577kg. EXEQ: 161603
REFERRED$300
Lot 30
Unused Hydraulic Tilting Mud Bucket to Suit 10-17T Excavator, Width: 1550mm, Pin Diameter: 65mm Centre to Centre: 385mm, Between the ears: 260mm, EXEQ: 161591
No result recorded
Lot 31
Unused Grab Attachment to Suit 10-17T Excavator, Width: 894mm, Pin Diameter: 65mm Centre to Centre: 385mm, Between the ears: 260mm, Maximum Grab Opening: 1145mm,Shipping Dimensions: L: 1000mm, W: 700mm, H: 1200mm, Weight: 600kg. EXEQ: 161573
REFERRED$100
Lot 32
Unused Mud Bucket to Suit 10-17T Excavator, Width: 1550mm, Pin Diameter: 65mm Centre to Centre: 385mm, Between the ears: 260mm, EXEQ: 161541
REFERRED$1500
Lot 33
Unused 900mm GP/Digging Bucket to Suit 10-17T Excavator, Width: 900mm, Cutting edge width: 690mm, Pin Diameter: 65mm Centre to Centre: 385mm, Between the ears: 260mm, EXEQ: 164723
REFERRED$100
Lot 34
Unused 600mm GP/Digging Bucket to Suit 10-17T Excavator, Width: 600mm, Cutting edge width: 690mm, Pin Diameter: 65mm Centre to Centre: 385mm, Between the ears: 260mm, EXEQ: 164714
REFERRED$100
Lot 35
Unused 450mm GP/Digging Bucket to Suit 10-17T Excavator, Width: 450mm, Cutting edge width: 520mm, Pin Diameter: 65mm Centre to Centre: 385mm, Between the ears: 260mm, EXEQ: 164703
REFERRED$100
Lot 36
Unused 2024 900mm GP/Digging Bucket To Suit 8T Excavator, Model: 900GP, Width: 900mm, Pin Diameter: 50mm, Center to Center: 310mm, Between the ears: 205mm, Shipping Dimension: L: 1140mm x W: 950mm x H: 990mm,Weight: 266KG EXEQ: 161471
No result recorded
Lot 37
"Unused 2024 600mm GP/Digging Bucket To Suit 8T Excavator, Model: 600GP, GP Bucket to Suit 8T Excavator with 3 Teeth, Width: 600mm, Pin Diameter: 50mm, Center to Center: 305mm, Between the ears: 205mm, Shipping dimensions: L: 1100mm x W: 630mm x H: 880mm, Weights: 219kgs. EXEQ: 161463
No result recorded
Lot 38
Unused 2024 450mm GP/Digging Bucket, To Suit 8T Excavator, Model: 450GP, Width: 450mm, Pin Diameter: 50mm, Center to Center: 310mm, Between the ears: 205mm, Shipping Dimension: L: 1140mm x W: 500mm x H: 880mm,Weight: 168KG EXEQ: 161451
No result recorded
Lot 39
Unused 300mm GP Bucket to Suit 8T Excavator, Width: 300mm, Pin Diameter: 50mm, Centre to Centre: 305mm, Between the ears: 205mm, Shipping Dimensions : 1140mm L x 350mm W x 880mm H, Weights: 155kgs EXEQ: 161446
No result recorded
Lot 40
Unused 2024 1500mm Mud Bucket To Suit 8T Excavator, Width: 1500mm, Pin Diameter: 50mm, Center to Center: 310mm, Between the ears: 205mm, Shipping Dimension: L: 800mm x W: 1515mm x H: 800mm,Weight: 535KG. EXEQ: 161481
REFERRED$100
Lot 41
Unused 2024 1500mm Tilt Bucket, To Suit 8T Excavator, Width: 1500mm, Pin Diameter: 50mm, Center to Center: 310mm, Between the ears: 205mm, Shipping Dimension: L: 860mm x W: 1500mm x H: 870mm, Weight: 460KG EXEQ:161491
REFERRED$100
Lot 42
Unused 2024 Compaction Wheel Attachment To Suit 8T Excavator, Width: 350mm, Shipping Dimension: L: 910mm x W: 710mm x H: 1440mm, Weight: 320KG Pin Diameter: 50mm, Center to Center: 310mm, Between the ears: 205mm, Weight: 320KG EXEQ161511
REFERRED$100
Lot 43
Unused 2024 600mm GP/Digging Bucket, To Suit 5T Excavator, Model: 600GP, Width: 600mm, Pin Diameter: 45mm, Center to Center: 255mm,Shipping Dimension: L: 980mm x W: 660mm x H: 800mm, Between the ears: 170mm, Weight: 160KG. EXEQ 161373
SOLD$1000
Lot 44
Unused 2024 450mm GP/Digging Bucket To Suit 5T Excavator, Model: 450GP, Width: 450mm, Pin Diameter: 45mm, Center to Center: 255mm,Shipping Dimension: L: 980mm x W: 505mm x H: 790mm, Between the ears: 170mm, Weight: 140KG. EXEQ: 161362
No result recorded
Lot 45
Unused 2024 300 mm GP/Digging BucketTo Suit 5T Excavator, Width: 230mm, Pin Diameter: 45mm, Center to Center: 255mm, Between the ears: 170mm, Shipping Dimension: L: 980mm x W: 350mm x H: 770mm, Weight: 125KG. EXEQ: 161360
REFERRED$100
Lot 46
Unused 2024 1200mm Mud Bucket To Suit 5T Excavator, Width: 1200mm, Pin Diameter: 45mm, Center to Center: 255mm, Between the ears: 170mm,Shipping Dimension: L: 800mm x W: 1200mm x H: 800mm, Weight: 227KG. EXEQ; 161382
REFERRED$300
Lot 47
Unused 2024 Compaction Wheel Attachment To Suit 5T Excavator, Width: 350mm, Pin Diameter: 45mm, Center to Center: 255mm, Between the ears: 170mm, Shipping Dimension: L: 800mm x W: 450mm x H: 1060mm, Weight: 305KG. EXEQ: 161411
REFERRED$300
Lot 48
Unused 2024 Manual 5 Finger Grab To Suit 5T Excavator, Pin Diameter: 45mm, Center to Center: 255mm, Between the ears: 170mm,Maximum Grab Opening: 950mm,Shipping Dimension: L: 680mm x W: 430mm x H: 995mm, Weight: 277KG. EXEQ: 161422
REFERRED$100