Past sales
Search 3,048 lots across 30 past catalogues. Results marked SOLD sold under the hammer; REFERRED lots may have sold by negotiation afterwards.
Set of 2 Large Unused Wrought Iron Style Gates with Cow Scene, Each gate is 9ft wide, Height at High Side: 2.3m, Height at Low Side: 1.8m, Made from Galvanised Steel, Total Approximate Combined Weight of both gates: 155kg EXEQS16893
Set of 2 Large Unused Wrought Iron Style Gates with Cow Scene, Each gate is 8ft wide, Height at High Side: 2.3m, Height at Low Side: 1.8m, Made from Galvanised Steel, Total Approximate Combined Weight of both gates: 135kg EXEQS16912
Set of 2 x 8ft Unused Wrought Iron Style Gates, Each gate is 8ft wide, Height at High Side: 2.3m, Height at Low Side: 1.8m, Made from Galvanised Steel, Approximate Combined Weight of both gates: 135kg EXEQS12825
Set of 2 Large Unused Wrought Iron Style Gates with Cow Scene, Each gate is 7ft wide, Height at High Side: 2.3m, Height at Low Side: 1.8m, Made from Galvanised Steel, Total Approximate Combined Weight of both gates: 150kg EXEQS16929
Set of 2 Small Unused Wrought Iron Style Gates with Wildlife Scene, Each gate is 7ft wide, Height at High Side: 2.3m, Height at Low Side: 1.8m, Made from Galvanised Steel, Total Approximate Combined Weight of both gates: 150kg EXEQS12844
Quantity of 400 Unused Star Pickets, 1665mm long, Shipping Dimensions: W: 800mm, H: 500mm EXEQS08818AT
Quantity of 400 Unused 1800mm Star Pickets, Approximate Shipping Dimensions: 1800mm L x 800mm W x 500mm H, Weight: 1305kgs, EXEQS12890H
Qty of 24 Wrought Iron Style Fence Panels, Made from Galvanised Steel, Powdered Coated, Comes with 24 Panels + 25 Posts, Each Panel is 10ft wide x 6ft 6in High, Rack Shipping Dimensions: 2.99m W x 1.1m L x 2.17m H, Weight: 950Kgs EXEQS09416R
Quantity of 8 Unused Cattle Fence Panels, Galvanized 6 Rail Panels, 1800mm High - 2080mm Wide, Weight: 30kgs per panel, 40mm outside Box Steel, 65mmx25mm Pressed Cattle Panel, 2 x Linking Pins included with each panel EXEQS19008E
Quantity of XXX Unused Galvanised Temporary Fence Panels, Each Panel comes with 1 x Clip & 1 x Concrete filled Base, Dimensions: 2100mm x 2400mm, Total Weight For 1 x Panel + Base + Clip is approximately 43Kgs EXEQS11285L
Unused 200Lb Cast Iron Anvil, Shipping Dimensions: 620mm L x 310mm W x 320mm High, Weight: 105Kgs EXEQS12738
Unused Container Loading/Unloading Ramp, Comes with Fork Pockets, Approximate Shipping Dimensions: 2100mm Wide x 1750mm L x 175mm High, Weight: 250Kgs EXEQ175815
Unused 75L Portable Fuel Tank with Manual Pump,, Model: GM7801, Maximum Flow: 20 lpm, 4m of ¾ inch Delivery Hose, Shipping Dimensions: 525mm x 425mm x 1015mm, Weight: 15kg EXEQS16991
Unused 75L Portable Fuel Tank with 12V DC Pump,, Model: DD7801, Maximum Flow: 40 lpm, 4m of ¾ inch Delivery Hose, Shipping Dimensions: 525mm x 425mm x 1015mm, Weight: 15kg EXEQS17015
Unused 12V Fuel Transfer Pump with meter, Model: GP40A 40 LPM, 2m of Suction Hose, 4m of Delivery Hose, Shipping Dimensions: 420mm Long x 350mm Wide x 350mm High, Approximate Weight: 20Kg EXEQS17152
Unused 12V Fuel Transfer Pump with meter, Model: GP40A 40 LPM, 2m of Suction Hose, 4m of Delivery Hose, Shipping Dimensions: 420mm Long x 350mm Wide x 350mm High, Approximate Weight: 20Kg EXEQS17146
Unused 240V Fuel Transfer Pump with meter, Model: GP60A, 56 LPM, 2m of Suction Hose 4m of Delivery Hose, Shipping Dimensions:420mm Long x 350mm Wide x 350mm High Approximate Weight: 20Kg EXEQS17198
Unused 240V Fuel Transfer Pump with meter, Model: GP60A, 56 LPM, 2m of Suction Hose 4m of Delivery Hose, Shipping Dimensions:420mm Long x 350mm Wide x 350mm High Approximate Weight: 20Kg EXEQS17199
Quantity of 4 Unused 23.5-25 Earthmoving Tyre, Tubeless, E-3/L-3, PR: 24, To suit 19.5 inch rim, Each Tyre Shipping Dimensions: 1615mm Diameter x 595mm Wide - Weight: 220Kgs EXEQ"S18478, S18479, S18480, S18481"
Quantity of 4x Unused 20.5-25 Earthmoving Tyres, Tubeless, Pattern: E3E, PR: 24, To suit 17 inch rim, Each Tyre approximate Shipping Dimensions: 1490mm Diameter x 520mm Wide, Weight: 150kg EXEQ"S18518, S18519, S18520, S18521"
Quantity of 4 Unused 17.5-25 Earthmoving Tyre, Tubeless, E-3/L-3, PR: 16, Standard Rim 14``, Each Tyre Shipping Dimensions: 1350mm Diameter x 445mm Wide - Weight: 120Kgs EXEQ"S09497, S09498, S09499, S09500"
Used 20T Ammann Smooth Drum Roller , Year: 2007, Model: ASC200D, Battery Isolator , Two way radio , E-stops , Hours Indicated 5962, Serial No: 107088/0086 EXEQ182046
Unused 1.5 Ton Mini Excavator, Model: S15Pro, Serial No: 251100013, Comes with 360mm GP Bucket, Piped for Auxiliary, Hydraulic Oil Flow Rate: 18L/min, Rubber Tracks, 930mm Levelling Blade, Diesel Engine, Operating weight: 1500Kgs, Shipping Dimensions: 2800mm L x 950mm W x 2200mm H Serial No: 2602000017 EXEQ Stock No 172688
Unused Tracked Mini Loader, Model: S382T-2, Comes with:, Briggs & Stratton 13.6 HP Petrol Engine, 1125mm GP Bucket, Rubber Tracks, Key Start, Piped for auxiliaries, Battery isolator, Operating Weight: 725Kgs, Approximate Shipping Dimensions:, 2300mm L x 1150mm wide x 1300mm High EXEQ Stock No 171920
1 x Complete 14ft Grader Mouldboard Cutting Edge, Comes with: 2 x Flat Edges Part No : 7D1577 (15 x 3/4” holes) 2 x End Edges (Curved) Part No 8E5529 (5 x 3/4” Holes) 40 x Plough Bolts to suit Dimensions: Flat Edges (2133mm x 203mm x 19mm) End Edges (463mm 152mm x 16mm) Total weight: 160Kgs approximately EXEQ Stock No S10167b, S10168b
7ft x 5ft Galvanised Single Axle Box Trailer, 330mm Side Height, 600mm Detachable Cage Side, Jockey Wheel, Shipping Dimensions: 3500mm long x 1850mm Wide x 770mm High Weight: 240kg VIN: 6TCBXT1T2TMA45824 EXEQ Stock No 175295
Unused Brush Cutter Attachment, To Suit Skid Steer, Cutting Width: 1828mm, Required Operating Flow: 75-115L/min, Operating Pressure: 16MPa, Approximate Shipping Dimensions 2333mm L x 1942mm W x 560mm H, Approximate Weight: 396kg, **NOTE: UNIT REQUIRES OIL TO BE ADDED TO THE GEARBOX BEFORE USE EXEQ Stock No 177075
Unused Vibratory Roller to Suit Skid Steer, Vibration Frequency: 2600Vpm, Vibration Force: 3880kg, Drum Diameter: 600mm, Drum Width: 1855mm, Approximate Shipping Dimensions: 2150mm L x 950mm D x 630mm H, Approximate Weight: 860kg EXEQ Stock No 178361
Unused Concrete Mixer Bucket Attachment, To Suit Skid Steer, Bucket Capacity: 0.35 Cubic Metres, Required Operating Flow: 75 - 140L/m, Operating Pressure: 16-21 MPA, Approximate Shipping Dimensions: 1700mm L x 920mm W x 800mm H, Approximate Weight: 525kg EXEQ Stock No 177087
Unused Auger Drive Attachment, To Suit Skid Steer, Comes with 1 x 12 Inch Auger, Required Operating Flow: 50-75 L/min, Operating Pressure: 16MPa, Approximate Shipping Dimensions: 1210mm L x 1110mm W x 810mm H, Approximate Weight: 240kg EXEQ Stock No 174870
Unused 4 in 1 Bucket, To Suit Skid Steer, 1840mm Wide, Approximate Shipping Dimensions: 1960mm L x 1055mm W x 790mm H, Approximate Weight: 240kg EXEQ Stock No 178364
Unused Grapple to Suit Skid Steer, 1680mm wide, Operating Pressure: 17-21MPa, Dual Ram, Approximate Shipping Dimensions: 1930mm L x 940mm W x 960mm H, Approximate Weight: 210kg EXEQ Stock No 172432
Unused Rock Grapple Bucket to Suit Skid Steer, to suit Skid Steer, 1828mm wide, Operating pressure: 17-21MPa, Dual Ram, Approximate Shipping dimensions: 1930mm L x 1100mm W. x 790mm H, Weight: 305Kgs EXEQ Stock No 166353
Unused Trencher Attachment for Skid Steer Loader, digging Width: 200mm, Digging Depth : 900mm, Required flow: 50-75 L/Min, Approximate Shipping Dimensions: 1900mm L x 1240mm W x 790mm H, Approximate Weight: 360kg EXEQ Stock No 177091
Unused Rock Bucket, To Suit Skid Steer, 1830mm wide, Approximate Shipping Dimensions 1950mm L x 1060mm W x 600mm H, Approximate Weight: 190kg EXEQ Stock No 166312
Unused Stick Rake Attachment, To Suit Skid Steer, Approximate Shipping Dimensions: 600mm high x 2190mm Wide EXEQ Stock No 176165
Unused Tree / Fence Post Puller, To Suit Skid Steer EXEQ Stock No 154157
Unused Forks Attachment, to suit Skid Steer, 1200mm Long Forks, Approximate Shipping Dimensions: 1240mm L x 1430mm W x 880mm H, Approximate Weight: 105kg EXEQ Stock No 176188
Unused Fork Extensions / Slippers, Overall length 1705mm, 145mm Wide, Locking pins, Approximate Shipping Dimensions: 1700mm L x 160mm W x 50mm H, Approximate Weight: 23kg EXEQ Stock No S11069
Unused Fork Extensions / Slippers, Overall length 1705mm, 145mm Wide, Locking pins, Approximate Shipping Dimensions: 1700mm L x 160mm W x 50mm H, Approximate Weight: 23kg EXEQ Stock No S11070
Unused Hydraulic Skid Steer / Excavator Post Driver, Model: EXEQ530P, To Suit both Skid Steers and/or 2.5-4 Ton Excavators, Side mount for Skid Steers / Top Mount for Excavators, Can be used as both Post Driver & Rock Breaker, Operating Pressure: 90-120 bar, Hydraulic Flow: 25-50 Litres per minute, Frequency - 600-1000 bpm, Comes with 1 x Post Driver & 2 x Chisels, Each unit comes with a separate heavy duty mounting plate for skid steers, To be attached by buyer, Approximate plate dimensions 1180mm x 480mm, Weight: 180kg, EXEQ Stock No 158337
Unused Large Levelling Bar, to suit skid steer / Loader, Approximately 2500mm wide x 2000mm long, with grabs, made from 50 x 50 heavy wall box, Approximate Shipping Dimensions: 2000mm L x 2500mm W x 20mm H, Approximate Weight: 100kg EXEQ Stock No S13261
Unused Medium Levelling Bar, to suit Skid Steer / Loader, Approximately 2000mm wide x 1500mm long, with grabs, made from 50 x 50 heavy wall box, Approximate Shipping Dimensions: 2000mm L x 1500mm W x 20mm H, Approximate Weight: 60kg EXEQ Stock No S13141
Unused Single Ram Hydraulic Grapple Attachment, Model: EXEQ08T, To Suit 5-10T Excavators, Maximum Opening: 950mm, Weight: 380Kgs, Required Flow: 50-100LPM, Pressure: 150-170Kg/cm2, Pin Diameter: 50mm, Total Width Between the ears: 260mm, (Width with Boss fitted 176 mm) Centre to Centre: 275mm, NOTE: Comes with Removeable Boss allowing Pin size changes), Shipping Dimensions: 620mm L x 900mm H x 1220mm W EXEQ Stock No 163030
Unused 1800mm Broom Attachment to suit 18-25T Excavator, Model: EXEQBR20, 1800mm wide, Pin Diameter: 80mm, Centre to Centre: 460mm, Between the ears: 340mm, Removable Head Stock, Fork Pockets, Shipping Dimensions: L: 1900mm x W: 720mm x H: 700mm, Weight: 270Kg\
Unused 1800mm Broom Attachment to suit 10-17T Excavator, Model: EXEQBR12, 1800mm wide, Pin Diameter: 65mm, Centre to Centre: 385mm, Between the ears: 260mm, Removable Head Stock, Fork Pockets, Shipping Dimensions: L: 1900mm x W: 660mm x H: 680mm, Weight: 243Kg EXEQ Stock No 176868
Unused 1500mm Broom Attachment to suit 8T Excavator, Model: EXEQBR08, 1500mm wide, Pin Diameter: 50mm, Centre to Centre: 305mm, Between the ears: 205mm, Removable Head Stock, Fork Pockets, Shipping Dimensions: L: 1600mm x W: 660mm x H: 650mm, Weight: 178Kg EXEQ Stock No 168582
Unused 1200mm Broom Attachment to suit 3T Excavator, Model: EXEQBR03, 1200mm wide, Pin Diameter: 40mm, Centre to Centre: 200mm, Between the ears: 145mm,Removable Head Stock, Fork Pockets, Shipping Dimensions: L: 1310mm x W: 660mm x H: 620mm, Weight:146Kg EXEQ Stock No 168565