Past sales
Jun 11 2026 · 137 lots · 39 sold under the hammer. REFERRED lots may have sold by negotiation afterwards.
1 x Complete 14ft Grader Mouldboard Cutting Edge, Comes with: 2 x Flat Edges Part No : 7D1577 (15 x 3/4” holes) 2 x End Edges (Curved) Part No 8E5529 (5 x 3/4” Holes) 40 x Plough Bolts to suit Dimensions: Flat Edges (2133mm x 203mm x 19mm) End Edges (463mm 152mm x 16mm) Total weight: 160Kgs approximately EXEQ Stock No S10167a, S10168a
Unused Grader Attachment to Suit Skid Steer, Blade Width 2.42m Rotation angle 25°, Incline Angle: 24°, Shipping Dimensions: 2590mm L x 2160mm W x 1365mm H, Weight: 640Kgs, EXEQ Stock No 174865
Unused Brush Cutter Attachment, To Suit Skid Steer, Cutting Width: 1828mm, Required Operating Flow: 75-115L/min, Operating Pressure: 16MPa, Approximate Shipping Dimensions 2333mm L x 1942mm W x 560mm H, Approximate Weight: 396kg, **NOTE: UNIT REQUIRES OIL TO BE ADDED TO THE GEARBOX BEFORE USE EXEQ Stock No 177073
Unused Concrete Mixer Bucket Attachment, To Suit Skid Steer, Bucket Capacity: 0.35 Cubic Metres, Required Operating Flow: 75 - 140L/m, Operating Pressure: 16-21 MPA, Approximate Shipping Dimensions: 1700mm L x 920mm W x 800mm H, Approximate Weight: 525kg EXEQ Stock No 177085
Unused Auger Drive Attachment, To Suit Skid Steer, Comes with 1 x 12 Inch Auger, Required Operating Flow: 50-75 L/min, Operating Pressure: 16MPa, Approximate Shipping Dimensions: 1210mm L x 1110mm W x 810mm H, Approximate Weight: 240kg EXEQ Stock No 174870
Unused Levelling Blade to Suit Skid Steer, Heavy Duty Cutting Edge, 1825mm wide, tilt angle 22.5 degrees, operating pressure: 16MPa, Approximate Shipping Dimensions: 1930mm L x 1060mm W x 740mm H, Approximate Weight: 310kg EXEQ Stock No 174874
Unused 4 in 1 Bucket, To Suit Skid Steer, 1840mm Wide, Approximate Shipping Dimensions: 1960mm L x 1055mm W x 790mm H, Approximate Weight: 240kg EXEQ Stock No 172430
Unused Grapple to Suit Skid Steer, 1680mm wide, Operating Pressure: 17-21MPa, Dual Ram, Approximate Shipping Dimensions: 1930mm L x 940mm W x 960mm H, Approximate Weight: 210kg
Unused Trencher Attachment for Skid Steer Loader, digging Width: 200mm, Digging Depth : 900mm, Required flow: 50-75 L/Min, Approximate Shipping Dimensions: 1900mm L x 1240mm W x 790mm H, Approximate Weight: 360kg EXEQ Stock No 177089
Unused Tiller Attachment, To Suit Skid Steer, 1850mm Wide, Operating Pressure: 16-21 MPA, Scarifying Width: 1520mm, Scarifying Depth - Adjustable from 0mm to 120mm, Approximate Shipping Dimensions: 2180mm L x 740mm W x 720mm H, Approximate Weight: 360kg EXEQ Stock No 170631
Unused Rock Bucket, To Suit Skid Steer, 1830mm wide, Approximate Shipping Dimensions 1950mm L x 1060mm W x 600mm H, Approximate Weight: 190kg EXEQ Stock No 166314
Unused Stick Rake Attachment, To Suit Skid Steer, Approximate Shipping Dimensions: 600mm high x 2190mm Wide EXEQ Stock No 176154
Unused Forks Attachment, to suit Skid Steer, 1200mm Long Forks, Approximate Shipping Dimensions: 1240mm L x 1430mm W x 880mm H, Approximate Weight: 105kg EXEQ Stock No 172052
Unused Fork Extensions / Slippers, Overall length 1705mm, 145mm Wide, Locking pins, Approximate Shipping Dimensions: 1700mm L x 160mm W x 50mm H, Approximate Weight: 23kg EXEQ Stock No S11010
Unused Fork Extensions / Slippers, Overall length 1705mm, 145mm Wide, Locking pins, Approximate Shipping Dimensions: 1700mm L x 160mm W x 50mm H, Approximate Weight: 23kg EXEQ Stock No S11011
Unused Hydraulic Skid Steer / Excavator Post Driver, Model: EXEQ750P, To Suit both Skid Steers and/or 6-8 Ton Excavators, Side mount for Skid Steers / Top Mount for Excavators, Can be used as both Post Driver & Rock Breaker, Operating Pressure: 120-170 bar, Hydraulic Flow: 50-90 Litres per minute, Frequency - 400-800 bpm, Comes with 1 x Post Driver & 2 x Chisels, Each unit comes with a separate heavy duty mounting plate for skid steers, To be attached by buyer, Approximate plate dimensions 1180mm x 480mm, Weight: 375kg, EXEQ Stock No 171611
Unused Hydraulic Skid Steer / Excavator Post Driver, Model: EXEQ530P, To Suit both Skid Steers and/or 2.5-4 Ton Excavators, Side mount for Skid Steers / Top Mount for Excavators, Can be used as both Post Driver & Rock Breaker, Operating Pressure: 90-120 bar, Hydraulic Flow: 25-50 Litres per minute, Frequency - 600-1000 bpm, Comes with 1 x Post Driver & 2 x Chisels, Each unit comes with a separate heavy duty mounting plate for skid steers, To be attached by buyer, Approximate plate dimensions 1180mm x 480mm, Weight: 180kg, EXEQ Stock No 158337
Unused Hydraulic Skid Steer / Excavator Post Driver, Model: EXEQ530P, To Suit both Skid Steers and/or 2.5-4 Ton Excavators, Side mount for Skid Steers / Top Mount for Excavators, Can be used as both Post Driver & Rock Breaker, Operating Pressure: 90-120 bar, Hydraulic Flow: 25-50 Litres per minute, Frequency - 600-1000 bpm, Comes with 1 x Post Driver & 2 x Chisels, Each unit comes with a separate heavy duty mounting plate for skid steers, To be attached by buyer, Approximate plate dimensions 1180mm x 480mm, Weight: 180kg, EXEQ Stock No 171603
Unused Large Levelling Bar, to suit skid steer / Loader, Approximately 2500mm wide x 2000mm long, with grabs, made from 50 x 50 heavy wall box, Approximate Shipping Dimensions: 2000mm L x 2500mm W x 20mm H, Approximate Weight: 100kg EXEQ Stock No S13258
Unused Medium Levelling Bar, to suit Skid Steer / Loader, Approximately 2000mm wide x 1500mm long, with grabs, made from 50 x 50 heavy wall box, Approximate Shipping Dimensions: 2000mm L x 1500mm W x 20mm H, Approximate Weight: 60kg EXEQ Stock No S13135
Unused 1500mm Broom Attachment to suit 8T Excavator, Model: EXEQBR08, 1500mm wide, Pin Diameter: 50mm, Centre to Centre: 305mm, Between the ears: 205mm, Removable Head Stock, Fork Pockets, Shipping Dimensions: L: 1600mm x W: 660mm x H: 650mm, Weight: 178Kg EXEQ Stock No 168582
Unused Dual Ram Hydraulic Grapple Attachment to Suit 8T Excavators, Pin Diameter: 50mm, Centre to Centre: 305mm, Between the ears: 205mm, Shipping Dimensions: 850mm L x 690mm W x 900mm H, Weight: 430Kgs EXEQ Stock No 166213
Unused Dual Ram Hydraulic Grapple Attachment to Suit 5T Excavators, Pin Diameter: 45mm, Centre to Centre: 255mm, Between the ears: 170mm, Shipping Dimensions: 750mm L x 620mm W x 850mm H, Weight: 365Kgs EXEQ Stock No 166197
Unused Dual Ram Hydraulic Grapple Attachment to Suit 3T Excavators, Pin Diameter: 40mm, Centre to Centre: 200mm, Between the ears: 145mm, Shipping Dimensions: 920mm L x 620mm W x 630mm H, Weight: 255Kgs EXEQ Stock No 166195
Unused Grab Attachment to Suit 28-36T Excavator, Width: 1270mm, Pin Diameter: 90mm, Centre to Centre: 513mm, Between the ears: 400mm, Maximum Grab Opening: 1960mm,Shipping Dimensions: L: 1300mm, W: 900mm, H: 1500mm, Weight: 1490kg EXEQ Stock No 158309
Unused 1300mm GP/Digging Bucket to Suit 28-36T Excavator, Width: 1300mm, Cutting edge width: 1400mm, Pin Diameter: 90mm, Centre to Centre: 513mm, Between the ears: 400mm, Shipping Dimensions: L: 1650mm, W: 1400mm, H: 1400mm, Weight: 1250kg EXEQ Stock No 158283
Unused Hydraulic Tilting Mud Bucket to Suit 18-25T Excavator, Width: 1850mm, Pin Diameter: 80mm, Centre to Centre: 460mm, Between the ears: 340mm, EXEQ Stock No 158265
Unused Sieve / Riddle Bucket to Suit 18-25T Excavator, Width: 1840mm Pin Diameter: 80mm, Centre to Centre: 460mm, Between the ears: 340mm,Shipping Dimensions: L: 1850mm, W: 1200mm, H: 1050mm, Weight: 1360kg EXEQ Stock No 164154
Unused Grab Attachment to Suit 18-25T Excavator, Width: 1010mm, Pin Diameter: 80mm, Centre to Centre: 460mm, Between the ears: 340mm, Maximum Grab Opening: 1880mm,Shipping Dimensions: L: 1200mm, W: 900mm, H: 1520mm, Weight: 1180kg EXEQ Stock No 166257
Unused Compaction Wheel to Suit 18-25T Excavator, Width: 480mm, Pin Diameter: 80mm, Centre to Centre: 460mm, Between the ears: 340mm, Shipping Dimensions: L: 890mm, W: 600mm, H: 1200mm, Weight: 900kg EXEQ Stock No 175069
Unused 900mm GP/Digging Bucket to Suit 18-25T Excavator, Width: 900mm, Cutting edge width: 980mm, Pin Diameter: 80mm, Centre to Centre: 460mm, Between the ears: 340mm, Shipping Dimensions: L: 1500mm, W: 1000mm, W: 1200mm, Weight: 810kg EXEQ Stock No 158204
Unused Hydraulic Tilting Mud Bucket to Suit 10-17T Excavator, Width: 1550mm, Pin Diameter: 65mm Centre to Centre: 385mm, Between the ears: 260mm, EXEQ Stock No 158184
Unused Sieve / Riddle Bucket to Suit 10-17T Excavator, Width: 1540mm, Pin Diameter: 65mm Centre to Centre: 385mm, Between the ears: 260mm, Shipping Dimensions: L: 1550mm, W: 1050mm, H: 900mm, Weight: 636kg EXEQ Stock No 164137
Unused Compaction Wheel to Suit 10-17T Excavator, Pin Diameter: 65mm Centre to Centre: 385mm, Between the ears: 260mm, Shipping Dimensions: L: 1100mm, W: 750mm, H: 450mm, Weight: 450kg EXEQ Stock No 175063
Unused 900mm GP/Digging Bucket to Suit 10-17T Excavator, Width: 900mm, Cutting edge width: 690mm, Pin Diameter: 65mm Centre to Centre: 385mm, Between the ears: 260mm, EXEQ Stock No 164193
Unused 600mm GP/Digging Bucket to Suit 10-17T Excavator, Width: 600mm, Cutting edge width: 690mm, Pin Diameter: 65mm Centre to Centre: 385mm, Between the ears: 260mm, EXEQ Stock No 164185
Unused 450mm GP/Digging Bucket to Suit 10-17T Excavator, Width: 450mm, Cutting edge width: 520mm, Pin Diameter: 65mm Centre to Centre: 385mm, Between the ears: 260mm, EXEQ Stock No 164174
Unused 2024 900mm GP/Digging Bucket To Suit 8T Excavator, Model: 900GP, Width: 900mm, Pin Diameter: 50mm, Center to Center: 310mm, Between the ears: 205mm, Shipping Dimension: L: 1140mm x W: 950mm x H: 990mm,Weight: 266KG EXEQ Stock No 158070
"Unused 2024 600mm GP/Digging Bucket To Suit 8T Excavator, Model: 600GP, GP Bucket to Suit 8T Excavator with 3 Teeth, Width: 600mm, Pin Diameter: 50mm, Center to Center: 305mm, Between the ears: 205mm, Shipping dimensions: L: 1100mm x W: 630mm x H: 880mm, Weights: 219kgs" EXEQ Stock No 158059
Unused 2024 450mm GP/Digging Bucket, To Suit 8T Excavator, Model: 450GP, Width: 450mm, Pin Diameter: 50mm, Center to Center: 310mm, Between the ears: 205mm, Shipping Dimension: L: 1140mm x W: 500mm x H: 880mm,Weight: 168KG EXEQ Stock No 158049
Unused 300mm GP Bucket to Suit 8T Excavator, Width: 300mm, Pin Diameter: 50mm, Centre to Centre: 305mm, Between the ears: 205mm, Shipping Dimensions : 1140mm L x 350mm W x 880mm H, Weights: 155kgs EXEQ Stock No 159157
Unused 2024 1500mm Mud Bucket To Suit 8T Excavator, Width: 1500mm, Pin Diameter: 50mm, Center to Center: 310mm, Between the ears: 205mm, Shipping Dimension: L: 800mm x W: 1515mm x H: 800mm,Weight: 535KG EXEQ Stock No 158079
Unused 2024 1500mm Tilt Bucket, To Suit 8T Excavator, Width: 1500mm, Pin Diameter: 50mm, Center to Center: 310mm, Between the ears: 205mm, Shipping Dimension: L: 860mm x W: 1500mm x H: 870mm, Weight: 460KG EXEQ Stock No 158090
Unused 2024 Ripper To Suit 8T Excavator, Pin Diameter: 50mm, Center to Center: 310mm, Between the ears: 205mm,Shipping Dimension: L: 695mm x W: 510mm x H: 1500mm, Weight: 146KG EXEQ Stock No 166201
Unused 2024 Manual 5 Finger Grab To Suit 8T Excavator, Pin Diameter: 50m, Center to Center: 310mm, Between the ears: 205mm, Maximum Grab Opening: 1100mm,Shipping Dimension: L: 890mm x W: 1250mm x H: 1460mm,Weight: 330KG EXEQ Stock No 158121
Unused 2024 450mm GP/Digging Bucket To Suit 5T Excavator, Model: 450GP, Width: 450mm, Pin Diameter: 45mm, Center to Center: 255mm,Shipping Dimension: L: 980mm x W: 505mm x H: 790mm, Between the ears: 170mm, Weight: 140KG EXEQ Stock No 157971
Unused 2024 Compaction Wheel Attachment To Suit 5T Excavator, Width: 350mm, Pin Diameter: 45mm, Center to Center: 255mm, Between the ears: 170mm, Shipping Dimension: L: 800mm x W: 450mm x H: 1060mm, Weight: 305KG EXEQ Stock No 157928
Unused 2024 Manual 5 Finger Grab To Suit 5T Excavator, Pin Diameter: 45mm, Center to Center: 255mm, Between the ears: 170mm,Maximum Grab Opening: 950mm,Shipping Dimension: L: 680mm x W: 430mm x H: 995mm, Weight: 277KG EXEQ Stock No 164092